Engine Type: Kubota® V2403-CR-E4B 4-cylinder, liquid-cooled dieselRated Horsepower:37.4 kWEmissions Level:EU Stage IIIBDisplacement:2434 ccAir Cleaner System:2-stage Donaldson® dry cartridge type with evacuator valve and service indicatorCooling System:Side-by-side radiator/hydraulic oil cooler; pressurised; 7.6 L capacityLubrication:Fully pressurisedFuel Capacity:64.4 LOil Filter Type:Full-flow, replaceable spin-on remote typeElectrical System:12V input/output controller; 40-amp alternator; 600 CCA battery Speed (Maximum) Mowing:11.3 km/hTransport:19.3 km/hReverse:8.1 km/h Traction and Drive Traction System:SureTrac™ 4WD, parallel-cross-series system servo-controlled variable displacement hydro; four high-torque wheel motors; 2WD in reverseDeck Drive:2-section pump and direct-cooled deck motorsHydraulic System:53 L capacity; hydraulic tank oil level monitor and horn alarm; GreensCare biodegradable fluid; full-flow, 10 micron filter, 40 gpmHydraulic Cooling:Side-by-side radiator/hydraulic oil cooler; pressurized Tires, Brakes, and Steering Front Tires:Two 26.5 x 14-12, 6-ply, turf treadRear Tires:Two 22.5 x 10-8, 4-ply turf treadBrakes:Dynamic, through-traction systemParking Brake:Wet parking brakes integrated in front wheel motors; engage switch on control consoleSteering:Rear wheel, hydrostatic power steering with tilt adjustable steering wheel Decks and Cutting Units Number and Size:Five, TrimTek™ 55.9 cm rotary cutting decks. Equipped for rear-discharge or mulching, with full-length rear roller and scraperConstruction:7-gauge heavy-duty welded with pressed steelCaster Wheels:Ten, 12.7 X 10.2 cm with greaseable tapered roller bearingsCutting Unit Lift:Hand operated, joystick controlled hydraulic lift systemWeight Transfer:Adjustable hydraulic weight transfer- automatic electronic activation at operator controlsBlades:Five, 56.8 cm heat treated alloy combo bladesMotor/Spindle:Fixed displacement, self-lubricating with 2.54 cm diameter shaft; double sealed bearingsHeight of cut:19 mm – 133 mm in 6 mm increments; minimal tools required for adjustmentCutting Capacity:Up to 2.59 ha/h at 11.27 km/h (no overlaps or stops)Overall Cutting Width:2.3 mFuel Economy & Runtime:4.18 L/hr fuel consumption at 40% load; Up to 15.5 hours on single tank of fuel (dependent on operator and turf Weight and Dimensions Weight:1747 kgLength:3.3 mHeight:2.26 m with ROPS up; 1.55 m with ROPS down or folded; 2.15 m with Ballcage installedWheelbase:1.6 mWidth:2.4 m